Maytech HV 120 6/12

Prezzo:: € 151,00

Quantità:

Descrizione

Il Kit comprende ESC+Scheda Programmazione

Main Features:

Use new generation of MOSFET to make sure the ESC low heating and more efficiency.
Secondary submenu setting is easier to be programmed by Maytech LED card.
Advance governor mode to keep motor speed even though the load is changed.
More optional motor timing setup and soft acceleration start-ups make the motors run smoothly.
Super smooth and accurate throttle linearity.
Supports high RPM motors, can match with most of the motors in RC market.
Power arming protection (prevents the motor from accidentally running when switched ON).
Over-eat Protection:
When the temperature of ESC exceeds 110 Degrees Celsius, the ESC will reduce the output power to allow it too cool.
Lost Throttle Signal Protection:
The ESC will automatically reduces output power to the motor when it detects throttle signal loss for 2 second, a subsequent loss of throttle signal beyond 2 seconds, will cause the ESC automatically to cut power to the motor.
All functions are programmable, to meet your specific needs.

The MAYTECH ESC's high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

Scheda Tecnica

MT120A-LV-SBEC-V1

Utilizzo RC Aeromodelli/Elicotteri

Corrente Continua 120A

Lipo 2-6 Celle

Corrente Massima (10sec)150A

NiMh 5-18Celle

Peso Netto +/-142g

BEC 6V/5A Switch

Dimensioni (mm)(L x W x H) 72x54x17

Programmazione Trasmittente/Program Card

Comparison of Maytech Harrier-Suprem V1 & V2 ESCs (Airplane/Helicopter)

Main Program	V1 Series	V2 Series	NOTE
Brake	Brake OFF / ON	Brake OFF / ON(Soft or Mid or Hard)
Battery Type	NiCad / Lipo	NiCd / Nimh / Lipo /LiFe
Cut Off Voltage Threshold	2.8V or 50% / 3.0V or 60% / 3.2V or 65%	2.8V or 50% / 3.0V or 60% / 3.2V or 65% / No Protection
Restore Factory Setup Defaults	Restore	Restore
Motor Timing	Automatic(7-30°) / Low(7-22°) / High(22-30°)	2° / 8° / 15°/ 22° / 30°	The correct timing value can make themotors run smoothly.
Soft Acceleration Start Up	Very Soft / Soft / Start ACC	10% / 15% / 20% / 25% / 30% / 35% / 40% / 45% / 50%
SBEC Voltage Output	5.5V 4A non-adjustable	5.0V / 5.5V / 6.0V (adjustable) 5A continuous	5A SBEC supplyServo with much stronger power.
Motor Rotation	Normal / Reverse	Forward / Reverse
Governor Mode	RPM Off / Heli first Range / Heli Second Range	Rpm off / 1st Soft Start / 2nd Soft Start / 3rd Soft Start / Governor Mode	If Governor Mode is activated,ESC ccan keep the motor speed whenthe load changed.
Low Voltage Cut Off Type	Reduce Power /Hard Cut Off	Reduce Power /Hard Cut Off
Soft Acceleration Start Up	Restore	Restore