• Quantità:
Totale: su preventivo
Il tuo carrello è vuoto.

Maytech HV 120 2/6

Maytech HV 120 2/6
€ 105,00
€ 71,40
€ 33,60 (32%)
Promozione valida fino al 31 dicembre


MT120A-LV-SBEC-V1 is a new generation of brushless and sensorless speed controllers with the control of micro processor. Its performance in terms of compatibility, reliability and stability can compete with world famous brands.
Main Features:
  • Extremely low internal resistance.
  • Super smooth and accurate throttle linearity.
  • Power arming protection: Prevents the motor from accidentally running when switched ON.
  • Lost Throttle signal protection:
  • The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
  • Safety thermal over-load protection:
  • Automatically reduce output power to half when the temperature reaches 110Degrees Celsius, restore output power when the temperature is below 110 Degrees Celsius.
  • Governor Mode: For Helicopter application.
  • With latest humanize software design, especially for all types of brushless motor.
  • Parameters programmable function to meet your specific needs.
The MAYTECH ESC's high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

Scheda Tecnica



Utilizzo  RC Aeromodelli/Elicotteri

Corrente Continua 120A 

Lipo 2-6 Celle

Corrente Massima (10sec)150A 

NiMh 5-18Celle

Peso Netto +/-139g 

BEC 6V/5A Switch 

Dimensioni (mm)(L x W x H) 55x73x17

Programmazione Trasmittente/Program Card


Comparison of Maytech Harrier-Suprem V1 & V2 ESCs (Airplane/Helicopter)


Main Program V1 Series V2 Series
Brake Brake OFF / ON Brake OFF / ON(Soft or Mid or Hard)  
Battery Type NiCad / Lipo NiCd / Nimh / Lipo / LiFe  
Cut Off Voltage Threshold 2.8V or 50% / 3.0V or 60% / 3.2V or 65% 2.8V or 50% / 3.0V or 60% / 3.2V or 65% / No Protection  
Restore Factory Setup Defaults Restore
Motor Timing Automatic(7-30°) / Low(7-22°) / High(22-30°) 2° / 8° / 15°/ 22° / 30°
The correct timing value can make themotors run smoothly.

Soft Acceleration         Start Up

Very Soft / Soft / Start ACC
10% / 15% / 20% / 25% / 30% / 35% / 40% / 45% / 50%  
SBEC Voltage           Output 5.5V 4A non-adjustable
5.0V / 5.5V / 6.0V (adjustable) 5A continuous
5A SBEC supplyServo with much stronger power.
Motor Rotation Normal / Reverse Forward / Reverse  
Governor Mode RPM Off / Heli first Range / Heli Second Range
Rpm off / 1st Soft Start / 2nd Soft Start / 3rd Soft Start / Governor Mode
If Governor Mode is activated,ESC ccan keep the motor speed whenthe load changed.
Low Voltage Cut Off Type Reduce Power /Hard Cut Off
Reduce Power /Hard Cut Off
Soft Acceleration Start Up Restore


  1. 1
    Maytech Program Card
    € 7,50
    € 5,10
    € 2,40 (32%)